VersiJack®

What is VersiJack®

VersiJack® is a heavy duty screw jack pedestal designed for floor, deck, paver, beam and bearer support.

VersiJack is used in the construction of roof terraces, pedestrian walkways, roof gardens, plaza decks, sun decks, balconies, pool surrounds, podium landscapes and verandas.

VersiJack® screwjack pedestal is adjustable in height from 14 mm to 1021 mm, with the use of proprietary “extenders”. Optional slope corrector can adjust slopes up to 5%.

VersiJack® reduces sound transmission, increases heat insulation and allows unsightly services to be concealed within the cavity under the elevated platform allowing easy access, when required.

VersiJack® can be used to create raised floors with most pavers including granite, marble, porcelain and precast concrete.  They are also widely used to support timber and composite bearers under decking.

VersiJack® is excellent for creating reusable or temporary exhibition flooring.

Elmich has recently launched a new Concealed Paver Retainer called (CPR)®. CPR is used in cases where wind uplift is a going to be problematic, especially in high-rise apartments. CPR attaches to the top of the VersiJack and the paver is glued to the device, This enables you to still have access to the waterproofing membrane.

VersiJack® carry a 20yr Product Warranty

VersiJack® is a raised decking product.

MAKE AN ENQUIRYBROCHURESSPECS

VersiJack® screwjack pedestals function for flooring support, deck support, beam, bearer and paver support on:

  • Roof terraces
  • Pedestrians walkways
  • Roof gardens
  • Plaza decks
  • Balconies
  • Pool surrounds
  • Reflective pools
  • Podium landscapes
  • Under water features
  • Raised technical floors
  • Under Solar panels
  • Temporary floors or Exhibition stands
versijack6

VersiJack® adjustable paving and decking support system

  • Eliminating the use of bedding sand
  • Easy access to concealed services and waterproofing membranes
  • Waterproofing membranes not penetrated
  • Allowing air ventilation and increased heat insulation
  • Elimination of efflorescence and algae
  • A cost effective alternative to brick piers
  • Stable deck support
  • Minimising sound transmission
  • Support US LEED™ credits
versijack_feat
  • Eliminating the use of bedding sand
  • Easy access to concealed services and waterproofing membranes
  • Waterproofing membranes not penetrated
  • Allowing air ventilation and increased heat insulation
  • Elimination of efflorescence and algae
  • A cost effective alternative to brick piers
  • Stable deck support
  • Minimising sound transmission
  • Support US LEED™ credits
versijack_adv_pic
  • Measure the total area to be paved to determine the number of pavers or beams required. One VersiJack® screwjack pedestal is required for every paver or for approximately each linear metre of beam to be supported.
  • Use sight or laser lines to mark the intersections of the corners of each paver to be laid.
  • Adjust the 0-5% inclinator to compensate for any fall in the slab.
  • Use 1-2 mm VersiJack® rubber shims if required to ensure each paver is level.
  • Position VersiJack® screwjack pedestals without tabs where edges and corners are to be supported. If necessary, saw along marked score lines on the bottom of the units so that units may be positioned along wall edges or in corners.
  • Commence paving by positioning the first paver in a corner and subsequent pavers along a wall edge.
  • Place the pavers into place on each VersiJack® screwjack pedestal and simply adjust either up or down to ensure each paver is level.
  • Position VersiJack® screwjack pedestals under beams and adjust units either up or down. Screw the beam into the eyelet in the top of the VersiJack® or tie the beam to the screwjack unit to ensure stable floor support.
versijack_inst_pic

VersiJack® screwjack pedestals support pavers, decking and flooring

balconies and other building structures

MaterialPolypropylene
ColourBlack
WeightVersiJack: approx. 640 g Extender: approx. 220 g
Height RangeFrom 14mm up to 1016 mm (with Extenders) - Paving
From 19mm up to 1021mm (with Extenders) - Decking
DimensionsHead diameter: 155 mm Base diameter: 205 mm Spacers size: 4 mm x 25 mm 6 mm x 25 mm 10 mm x 25 mm Extender height: 75 - 112.5 mm
Compressive strength @ 150 mm height> 15 kN (@ 0% slope)
Slope Compensation0 to 5% @ 1% increments
Biological/Chemical ResistanceUnaffected by moulds and algae and good resistance to alkalis and bitumen